godot

@GDScript.xml

doc: Sync classref and escape comparators

2017-09-17 18:57:17 +02:00

@Global Scope.xml

doc: Sync classref and escape comparators

2017-09-17 18:57:17 +02:00

@NativeScript.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

@VisualScript.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

AcceptDialog.xml

Rewrite the AcceptDialog class

2017-09-16 14:56:04 +12:00

AnimatedSprite3D.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

AnimatedSprite.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Animation.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

AnimationPlayer.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

AnimationTreePlayer.xml

doc: Sync classref with current source

2017-09-16 01:46:29 +02:00

Area2D.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Area.xml

doc: Sync classref with current source

2017-09-16 01:46:29 +02:00

Array.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

ArrayMesh.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

ARVRAnchor.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

ARVRCamera.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

ARVRController.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

ARVRInterface.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

ARVROrigin.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

ARVRPositionalTracker.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

ARVRScriptInterface.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

ARVRServer.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

AStar.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

AtlasTexture.xml

Documentation for AtlasTexture.

2017-09-13 13:37:33 +02:00

AudioBusLayout.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

AudioEffect.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

AudioEffectAmplify.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

AudioEffectBandLimitFilter.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

AudioEffectBandPassFilter.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

AudioEffectChorus.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

AudioEffectCompressor.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

AudioEffectDelay.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

AudioEffectDistortion.xml

doc: Sync classref with current source

2017-09-16 01:46:29 +02:00

AudioEffectEQ6.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

AudioEffectEQ10.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

AudioEffectEQ21.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

AudioEffectEQ.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

AudioEffectFilter.xml

doc: Sync classref with current source

2017-09-16 01:46:29 +02:00

AudioEffectHighPassFilter.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

AudioEffectHighShelfFilter.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

AudioEffectLimiter.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

AudioEffectLowPassFilter.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

AudioEffectLowShelfFilter.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

AudioEffectNotchFilter.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

AudioEffectPanner.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

AudioEffectPhaser.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

AudioEffectPitchShift.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

AudioEffectReverb.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

AudioEffectStereoEnhance.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

AudioServer.xml

doc: Sync classref with current source

2017-09-16 01:46:29 +02:00

AudioStream.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

AudioStreamOGGVorbis.xml

Added Documentation of AudioStream

2017-09-17 13:48:10 +02:00

AudioStreamPlayback.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

AudioStreamPlayer2D.xml

Added Documentation of AudioStreamPlayer2D

2017-09-17 10:52:41 +02:00

AudioStreamPlayer3D.xml

wrote documentation for audio stream player 3D

2017-09-17 13:08:08 +02:00

AudioStreamPlayer.xml

Merge pull request #11332 from Grosskopf/audio-stream-player-docs

2017-09-17 12:38:14 +02:00

AudioStreamRandomPitch.xml

Added Documentation of AudioStream

2017-09-17 13:48:10 +02:00

AudioStreamSample.xml

Added Documentation of AudioStream

2017-09-17 13:48:10 +02:00

BackBufferCopy.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

BaseButton.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Basis.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

BitMap.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

BitmapFont.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

BoneAttachment.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

bool.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

BoxContainer.xml

Refactor the BoxContainer and BoxShape classes

2017-09-16 18:39:00 +12:00

BoxShape.xml

Refactor the BoxContainer and BoxShape classes

2017-09-16 18:39:00 +12:00

Button.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

ButtonGroup.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Camera2D.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Camera.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

CanvasItem.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

CanvasItemMaterial.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

CanvasLayer.xml

[DOCS] CanvasLayer member descriptions

2017-09-16 19:14:03 -07:00

CanvasModulate.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

CapsuleMesh.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

CapsuleShape2D.xml

[DOCS] added member descriptions to various shapes

2017-09-16 21:55:23 -07:00

CapsuleShape.xml

[DOCS] added member descriptions to various shapes

2017-09-16 21:55:23 -07:00

CenterContainer.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

CheckBox.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

CheckButton.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

CircleShape2D.xml

[DOCS] added member descriptions to various shapes

2017-09-16 21:55:23 -07:00

ClassDB.xml

Added documentation for ClassDB and Marshalls

2017-09-13 12:43:12 -05:00

CollisionObject2D.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

CollisionObject.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

CollisionPolygon2D.xml

Modified the descriptions for CollisionPolygon2D and created descriptions for CollisionPolygon

2017-09-16 18:42:47 -07:00

CollisionPolygon.xml

Modified the descriptions for CollisionPolygon2D and created descriptions for CollisionPolygon

2017-09-16 18:42:47 -07:00

CollisionShape2D.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

CollisionShape.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Color.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

ColorPicker.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

ColorPickerButton.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

ColorRect.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

ConcavePolygonShape2D.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

ConcavePolygonShape.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

ConeTwistJoint.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

ConfigFile.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

ConfirmationDialog.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Container.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Control.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

ConvexPolygonShape2D.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

ConvexPolygonShape.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

CubeMap.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

CubeMesh.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Curve2D.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Curve3D.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Curve.xml

doc: Sync classref with current source

2017-09-16 01:46:29 +02:00

CurveTexture.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

CylinderMesh.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

DampedSpringJoint2D.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Dictionary.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

DirectionalLight.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Directory.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

DynamicFont.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

DynamicFontData.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

EditorExportPlugin.xml

doc: Sync classref with current source

2017-09-16 01:46:29 +02:00

EditorFileDialog.xml

doc: Sync classref with current source

2017-09-16 01:46:29 +02:00

EditorFileSystem.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

EditorFileSystemDirectory.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

EditorImportPlugin.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

EditorInterface.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

EditorPlugin.xml

doc: Sync classref with current source

2017-09-16 01:46:29 +02:00

EditorResourcePreview.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

EditorResourcePreviewGenerator.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

EditorScript.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

EditorSelection.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

EditorSettings.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

EditorSpatialGizmo.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

EncodedObjectAsID.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Engine.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Environment.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

File.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

FileDialog.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

float.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Font.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

FuncRef.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

GDFunctionState.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

GDNative.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

GDNativeClass.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

GDNativeLibrary.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

GDScript.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Generic6DOFJoint.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Geometry.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

GeometryInstance.xml

doc: Sync classref with current source

2017-09-16 01:46:29 +02:00

GIProbe.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

GIProbeData.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Gradient.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

GradientTexture.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

GraphEdit.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

GraphNode.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

GridContainer.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

GrooveJoint2D.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

HBoxContainer.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

HingeJoint.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

HScrollBar.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

HSeparator.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

HSlider.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

HSplitContainer.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

HTTPClient.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

HTTPRequest.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Image.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

ImageTexture.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

ImmediateGeometry.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Input.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

InputDefault.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

InputEvent.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

InputEventAction.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

InputEventJoypadButton.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

InputEventJoypadMotion.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

InputEventKey.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

InputEventMouse.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

InputEventMouseButton.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

InputEventMouseMotion.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

InputEventScreenDrag.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

InputEventScreenTouch.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

InputEventWithModifiers.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

InputMap.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

InstancePlaceholder.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

int.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

InterpolatedCamera.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

IP_Unix.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

IP.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

ItemList.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Joint2D.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Joint.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

JSON.xml

doc: Sync classref and escape comparators

2017-09-17 18:57:17 +02:00

JSONParseResult.xml

doc: Sync classref and escape comparators

2017-09-17 18:57:17 +02:00

KinematicBody2D.xml

Document new KinematicCollision2D class

2017-09-16 18:42:07 -07:00

KinematicBody.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

KinematicCollision2D.xml

Document new KinematicCollision2D class

2017-09-16 18:42:07 -07:00

KinematicCollision.xml

[DOCS] Add KinematicCollision descriptions

2017-09-16 21:56:03 -07:00

Label.xml

Write TextureRect, Label and NinePatchRect

2017-09-16 21:09:43 +02:00

LargeTexture.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Light2D.xml

doc: Sync classref and escape comparators

2017-09-17 18:57:17 +02:00

Light.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

LightOccluder2D.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Line2D.xml

doc: Sync classref with current source

2017-09-16 01:46:29 +02:00

LineEdit.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

LineShape2D.xml

[DOCS] added member descriptions to various shapes

2017-09-16 21:55:23 -07:00

LinkButton.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Listener.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

MainLoop.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

MarginContainer.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Marshalls.xml

Added documentation for ClassDB and Marshalls

2017-09-13 12:43:12 -05:00

Material.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

MenuButton.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Mesh.xml

doc: Sync classref with current source

2017-09-16 01:46:29 +02:00

MeshDataTool.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

MeshInstance.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

MeshLibrary.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

MultiMesh.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

MultiMeshInstance.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Mutex.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

NativeScript.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Navigation2D.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Navigation.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

NavigationMesh.xml

doc: Sync classref with current source

2017-09-13 20:56:23 +02:00

NavigationMeshInstance.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

NavigationPolygon.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

NavigationPolygonInstance.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

NetworkedMultiplayerENet.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

NetworkedMultiplayerPeer.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Nil.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

NinePatchRect.xml

Write TextureRect, Label and NinePatchRect

2017-09-16 21:09:43 +02:00

Node2D.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Node.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

NodePath.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Object.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

OccluderPolygon2D.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

OmniLight.xml

doc: Sync classref with current source

2017-09-16 01:46:29 +02:00

OptionButton.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

OS.xml

doc: Sync classref and escape comparators

2017-09-17 18:57:17 +02:00

PackedDataContainer.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

PackedDataContainerRef.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

PackedScene.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

PacketPeer.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

PacketPeerStream.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

PacketPeerUDP.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Panel.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

PanelContainer.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

PanoramaSky.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

ParallaxBackground.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

ParallaxLayer.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Particles2D.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Particles.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

ParticlesMaterial.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Path2D.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Path.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

PathFollow2D.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

PathFollow.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

PCKPacker.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Performance.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

PHashTranslation.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Physics2DDirectBodyState.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Physics2DDirectBodyStateSW.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Physics2DDirectSpaceState.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Physics2DServer.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Physics2DServerSW.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Physics2DShapeQueryParameters.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Physics2DShapeQueryResult.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Physics2DTestMotionResult.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

PhysicsBody2D.xml

Modified/Added documentation for PhysicsBody and PhysicsBody2D

2017-09-16 23:47:20 -07:00

PhysicsBody.xml

Modified/Added documentation for PhysicsBody and PhysicsBody2D

2017-09-16 23:47:20 -07:00

PhysicsDirectBodyState.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

PhysicsDirectBodyStateSW.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

PhysicsDirectSpaceState.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

PhysicsServer.xml

doc: Sync classref with current source

2017-09-16 01:46:29 +02:00

PhysicsServerSW.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

PhysicsShapeQueryParameters.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

PhysicsShapeQueryResult.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

PinJoint2D.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

PinJoint.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Plane.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

PlaneMesh.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

PlaneShape.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Polygon2D.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

PolygonPathFinder.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

PoolByteArray.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

PoolColorArray.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

PoolIntArray.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

PoolRealArray.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

PoolStringArray.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

PoolVector2Array.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

PoolVector3Array.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Popup.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

PopupDialog.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

PopupMenu.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

PopupPanel.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Position2D.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Position3D.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

PrimitiveMesh.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

PrismMesh.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

ProceduralSky.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

ProgressBar.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

ProjectSettings.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

ProximityGroup.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

QuadMesh.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Quat.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Range.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

RayCast2D.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

RayCast.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

RayShape2D.xml

[DOCS] added member descriptions to various shapes

2017-09-16 21:55:23 -07:00

RayShape.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Rect2.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Rect3.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

RectangleShape2D.xml

[DOCS] added member descriptions to various shapes

2017-09-16 21:55:23 -07:00

Reference.xml

doc: Sync classref with current source

2017-09-16 01:46:29 +02:00

ReferenceRect.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

ReflectionProbe.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

RegEx.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

RegExMatch.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

RemoteTransform2D.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

RemoteTransform.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Resource.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

ResourceImporter.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

ResourceImporterOGGVorbis.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

ResourceInteractiveLoader.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

ResourceLoader.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

ResourcePreloader.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

ResourceSaver.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

RichTextLabel.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

RID.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

RigidBody2D.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

RigidBody.xml

doc: Sync classref with current source

2017-09-16 01:46:29 +02:00

SceneState.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

SceneTree.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

SceneTreeTimer.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Script.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

ScriptEditor.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

ScrollBar.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

ScrollContainer.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

SegmentShape2D.xml

[DOCS] added member descriptions to various shapes

2017-09-16 21:55:23 -07:00

Semaphore.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Separator.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Shader.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

ShaderMaterial.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Shape2D.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Shape.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

ShortCut.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Skeleton.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Sky.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Slider.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

SliderJoint.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Spatial.xml

Spatial, Transform and Transform2D documentation tweaks

2017-09-15 09:16:30 +02:00

SpatialGizmo.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

SpatialMaterial.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

SpatialVelocityTracker.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

SphereMesh.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

SphereShape.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

SpinBox.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

SplitContainer.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

SpotLight.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Sprite3D.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Sprite.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

SpriteBase3D.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

SpriteFrames.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

StaticBody2D.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

StaticBody.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

StreamPeer.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

StreamPeerBuffer.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

StreamPeerSSL.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

StreamPeerTCP.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

StreamTexture.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

String.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

StyleBox.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

StyleBoxEmpty.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

StyleBoxFlat.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

StyleBoxTexture.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

SurfaceTool.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

TabContainer.xml

doc: Sync classref with current source

2017-09-16 01:46:29 +02:00

Tabs.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

TCP_Server.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

TextEdit.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Texture.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

TextureButton.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

TextureProgress.xml

[DOCS] Update TextureProgress class ref

2017-09-16 09:45:41 -07:00

TextureRect.xml

Write TextureRect, Label and NinePatchRect

2017-09-16 21:09:43 +02:00

Theme.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Thread.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

TileMap.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

TileSet.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Timer.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

ToolButton.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

TouchScreenButton.xml

doc: Sync classref with current source

2017-09-16 01:46:29 +02:00

Transform2D.xml

Spatial, Transform and Transform2D documentation tweaks

2017-09-15 09:16:30 +02:00

Transform.xml

Spatial, Transform and Transform2D documentation tweaks

2017-09-15 09:16:30 +02:00

Translation.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

TranslationServer.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Tree.xml

doc: Sync classref with current source

2017-09-13 20:56:23 +02:00

TreeItem.xml

doc: Sync classref with current source

2017-09-16 01:46:29 +02:00

TriangleMesh.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Tween.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

UndoRedo.xml

doc: Sync classref and escape comparators

2017-09-17 18:57:17 +02:00

Variant.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

VBoxContainer.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Vector2.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

Vector3.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VehicleBody.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VehicleWheel.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VideoPlayer.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VideoStream.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

Viewport.xml

doc: Sync classref with current source

2017-09-16 01:46:29 +02:00

ViewportContainer.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

ViewportTexture.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VisibilityEnabler2D.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VisibilityEnabler.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VisibilityNotifier2D.xml

[DOCS] update VisibilityNotifier2D class ref.

2017-09-16 17:13:33 -07:00

VisibilityNotifier.xml

[DOCS] update VisibilityNotifier2D class ref.

2017-09-16 17:13:33 -07:00

VisualInstance.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VisualScript.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VisualScriptBasicTypeConstant.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VisualScriptBuiltinFunc.xml

doc: Sync classref with current source

2017-09-16 01:46:29 +02:00

VisualScriptClassConstant.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VisualScriptComment.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VisualScriptCondition.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

VisualScriptConstant.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VisualScriptConstructor.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VisualScriptCustomNode.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

VisualScriptDeconstruct.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VisualScriptEmitSignal.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VisualScriptEngineSingleton.xml

Fix 2 typos

2017-09-14 10:31:43 +02:00

VisualScriptExpression.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

VisualScriptFunction.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

VisualScriptFunctionCall.xml

doc: Sync classref with current source

2017-09-16 01:46:29 +02:00

VisualScriptFunctionState.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

VisualScriptGlobalConstant.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VisualScriptIndexGet.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

VisualScriptIndexSet.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

VisualScriptInputAction.xml

doc: Sync classref with current source

2017-09-16 01:46:29 +02:00

VisualScriptIterator.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

VisualScriptLocalVar.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VisualScriptLocalVarSet.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VisualScriptMathConstant.xml

doc: Sync classref with current source

2017-09-16 01:46:29 +02:00

VisualScriptNode.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VisualScriptOperator.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VisualScriptPreload.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VisualScriptPropertyGet.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VisualScriptPropertySet.xml

doc: Sync classref with current source

2017-09-16 01:46:29 +02:00

VisualScriptResourcePath.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VisualScriptReturn.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VisualScriptSceneNode.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VisualScriptSceneTree.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

VisualScriptSelect.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VisualScriptSelf.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

VisualScriptSequence.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VisualScriptSubCall.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

VisualScriptSwitch.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

VisualScriptTypeCast.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VisualScriptVariableGet.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VisualScriptVariableSet.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VisualScriptWhile.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

VisualScriptYield.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VisualScriptYieldSignal.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

VisualServer.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

VScrollBar.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

VSeparator.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

VSlider.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

VSplitContainer.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

WeakRef.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

WindowDialog.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

World2D.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

World.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

WorldEnvironment.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00

XMLParser.xml

Changed the doc class generation to individual files per class. It is also possible to save module files in module directories and the build system will

2017-09-12 17:45:41 -03:00

YSort.xml

doc: Sync classref with current source

2017-09-13 08:53:01 +02:00